The following article is Free article

A High Energy Density Solid‐State Battery System

and

© 1976 ECS - The Electrochemical Society
, , Citation C. C. Liang and L. H. Barnette 1976 J. Electrochem. Soc. 123 453DOI 10.1149/1.2132855

1945-7111/123/4/453

Abstract

The discharge and storage characteristics of a new solid‐state battery system, Equation or symbol description not availableLi/LiI(Al2O3)/PbI2, Equation or symbol description not availablePbS, Pb were investigated. Results of the discharge tests suggested that both Equation or symbol description not availablePbI2 and Equation or symbol description not availablePbS are cathode active and can be discharged efficiently. A discharge efficiency of 100% was realized on test cells with a stoichiometric capacity of 18 mA‐hr/cm2 at a drain rate of 10 μA/cm2at room temperature. Results of the storage tests showed that the system is stable on storage. Test cells experienced no capacity loss after a storage period of one year at room temperature, 45°, and 60°C. The discharge and storage characteristics indicate that the system is a practical, low rate solid‐state battery system and the practical batteries have a volumetric energy density of 8 W‐hr/in.3 (0.49 W‐hr/cm3) at a power level of 150 μW/in3.

Export citation and abstractBibTeXRIS

10.1149/1.2132855