Based on the pyrolysis of trichloroethene Equation or symbol description not available(C2HCl3), also referred to as TCE, and the thermodynamic analysis of its reaction products a substitute for TCE is found. It is characterized by better physical and chemical properties and behaves as an additive during silicon oxidation identical to Equation or symbol description not availableHCl. This chlorinated hydrocarbon, 1.1.1.‐trichloroethane (referred to as C33) is used for fabrication of MOS capacitors on n‐type silicon to study the properties of oxides grown with this additive. Special attention is paid to the properties influencing the performance of charge coupled devices. Storage times of 500 sec, oxide defect density of 10/cm2, and surface‐state densities lower than Equation or symbol description not available5×109/cm2 eV are achieved. The cleaning effect on the furnace tube yields a mobile ion density lower than Equation or symbol description not available2×109/cm2. The fixed oxide charge on (100) material is Equation or symbol description not available5×1010 cm−2. Fabrication of CCD's with this technology proves its suitability in silicon device processing.