The deposition of epitaxial silicon films on (overline 1012) Czochralski sapphire from the silane/hydrogen system was investigated for growth temperatures from 880° to 980°C and for growth rates from 0.2 to 6.0 μm/min. The film quality was evaluated by optical absorption measurements. The temperature range, in which epitaxial film quality was obtained, shifts with increasing growth rates to higher deposition temperatures. This epitaxial temperature range is rather broad, e.g., 915°–965°C for 0.2–0.5 μm/min and 935°–985°C for 5.3–6.0 μm/min. A region for the optimum epitaxial deposition conditions, very suitable for MOS applications, is defined by the minimum values obtained from the optical absorption measurements. At temperatures below 915°C, decreasing crystalline quality was observed due to an increasing fraction of polycrystalline silicon. In addition the influence of the Equation or symbol description not availableH2O content on the crystalline quality of the silicon films was investigated; for the production of a good epitaxial silicon film the Equation or symbol description not availableH2O impurity fraction must be smaller than 1 ppm, especially in the low temperature region.