The following article is Free article

The Use of Tetravalent Sulfur in Molten Chloroaluminate Secondary Batteries

, , , , and

© 1980 ECS - The Electrochemical Society
, , Citation G. Mamantov et al 1980 J. Electrochem. Soc. 127 2319DOI 10.1149/1.2129405

1945-7111/127/11/2319

Abstract

A new rechargeable cell Na/Na+ ion Equation or symbol description not availableconductor/SCl3+ in molten Equation or symbol description not availableAlCl3‐NaClis described. This cell operates at temperatures in the range of 180°–250°C and has an open‐circuit voltage of 4.2V. The discharge process involves the reduction of tetravalent sulfur to the elemental state; sulfur can be further reduced to sulfide. The preferred sodium ion conductor is β″‐alumina. High energy density values, large percent utilization of the active material, and good energy efficiency have been demonstrated. The performance of cells prepared in the discharged and charged states were found to be the same. The number of deep charge/discharge cycles has exceeded 400.

Export citation and abstractBibTeXRIS

10.1149/1.2129405