Abstract
Several electronically conducting ceramic and metallic coatings were investigated to determine their potential for use as current collectors in the positive electrodes of Li‐Al/molten
battery cells. Static and in‐cell corrosion tests in laboratory‐scale cells were performed; the static tests were considerably more severe than the in‐cell tests. Chemical vapor deposited (CVD)
and
coatings on inexpensive iron‐based substrates showed significant promise in both tests. Analysis of the results led to the recommendation that the coating quality and thickness, the substrate type, the coating procedure, the design of the cell components, and the electrochemical conditions be optimized to achieve maximum coating stability in long‐term operation of
cells.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
