A multicolor line emission penetration phosphor, suitable for use in high brightness CRT's, has been developed. The system consists of multilayered powder particles containing a green‐emitting Equation or symbol description not availableLa2O2S:Tb core, a nonluminescentEquation or symbol description not availableLa2O2SO4:Tb middle layer, and a cover coating of small (∼1 μm) red‐emitting Equation or symbol description not availableYVO4:Eu particles. Preparation of the phosphor involves two basic steps: (i) the controlled oxidation of Equation or symbol description not availableLa2O2S:Tb particles to produce an onionskin surface layer of Equation or symbol description not availableLa2O2SO4:Tb and (ii) coating of the core particles with the small Equation or symbol description not availableYVO4:Eu particles using a gelatin adsorption technique. Optimization with respect to brightness and color range yielded a system that was significantly brighter than previously developed line emission penetration phosphors while providing a comparable color range. Further, large size core particles were found to improve the phosphor system performance due to a saturation of the red component brightness at high working voltages. The paper discusses details of the preparation, optimization, and cathodoluminescent properties of this system.