Crystalline structure changes of molybdenum silicide films after isochronal annealing are studied by x‐ray and transmission electron microscopy. Two types of films deposited by sputtering from a hot pressed Equation or symbol description not availableMoSi2 source and coevaporation of molybdenum and silicon, with controlled stoichiometry of Equation or symbol description not availableMoSi2, are prepared. For both types of depositions, the films that are as‐deposited and annealed at temperatures below 350°C are amorphous, but those annealed between 400° and 600°C show hexagonal Equation or symbol description not availableMoSi2. Transformation from hexagonal to tetragonal Equation or symbol description not availableMoSi2 occurs above 700°C for the coevaporated film, whereas it proceeds gradually above 800°C for the sputtered film. A carbon stabilized phase Equation or symbol description not availableSi3Mo5 is observed above 750°C for the sputtered film, which suggests that the sputtered film is contaminated by carbon during the deposition. Formation of the Mo‐rich silicides Equation or symbol description not availableMo3Si2 and Equation or symbol description not availableSi3Mo5 above 700°C is evidence that the deposited films become Mo‐rich during the annealing due to slight oxidation of the film surface.