Abstract
The void formation process and phosphorus behavior in phosphosilicate glass film deposited by chemical vapor deposition techniques were investigated. The films were heat‐treated three times, first in
atmosphere for densification, then in
or
atmosphere, and after that in
atmosphere. It was found that (i) void formation takes place with the third heat‐treatment in
atmosphere, (ii) with the second heat‐treatment in
atmosphere, absorbance of P=O band at 1330 cm−1decreases and absorbance of band at 1250 cm−1 increases, but further absorbance change does not take place with the third heat‐treatment. The gain in absorbance of the band at 1250 cm−1 is proportional to the loss in absorbance of the P=O band at 1330 cm−1. The quantity of phosphorus products formed with heat‐treatment in
atmosphere was estimated from the absorbance change of the P=O band at 1330 cm−1. Comparing the quantity of the phosphorus products with the void size and number, it was proposed that the phosphorus products are gaseous species at high temperature, and the quantity of the gaseous species determines the product of the void number in the PSG film and square of the void size.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
