Titanium, thermally oxidized titanium, and single‐crystal Equation or symbol description not availableTiO2 have been coated with polyvinylferrocene by an argon‐vinylferrocene radio frequency plasma discharge. Voltammetry is observed consistent with the oxidation of ferrocene sites in the polymeric coating at potentials 1.5V positive of the flatband potential for Equation or symbol description not availableTiO2 in Equation or symbol description not availableCH3CN. As the thickness of the oxide phase is increased, the ease with which ferrocene sites are oxidized decreases. Comparisons are made to Equation or symbol description not availableTiO2 substrates coated with polyvinylferrocene by evaporative deposition; these electrodes give a more classical blocking response. The plasma discharge physically alters the semiconductor surface, most likely by generating surface states. In addition, the voltammetric response for plasma‐coated Equation or symbol description not availableTiO2/polyvinylferrocene electrodes is improved if conducting materials (e.g., Pt or glassy carbon) are also present in the plasma reactor during plasma deposition. We show that very small minority carrier oxidation currents can be measured by trapping the oxidative charge as ferricenium in the polymer film via potentiostatic experiments at quite positive potentials.