Boron‐arsenic and boron‐phosphorus films have been grown on Si, sapphire, and silicon‐on‐sapphire (SOS) by pyrolyzing Group III alkyls of boron, i.e., trimethylborane (TMB) and triethylborane (TEB), in the presence of Equation or symbol description not availableAsH3 and Equation or symbol description not availablePH3, respectively, in a Equation or symbol description not availableH2 atmosphere. No evidence for reaction between the alkyls and the hydrides on mixing at room temperature was found. The films were predominantly amorphous. The film growth rate was found to depend on the concentration of alkyl boron compound and was essentially constant when TEB and Equation or symbol description not availableAsH3 were pyrolyzed over the temperature range 550°–900°C. The films were found to contain mainly carbon impurities (the amount varying with growth temperature), some oxygen, and were highly stressed and bowed on Si substrates, with some crazing evident in thin (2 μm) B‐P and thick (5 μm) B‐As films. The carbon level was generally higher in films grown using TEB as the boron source. Films grown from Equation or symbol description not availablePH3 and TMB showed a higher carbon content than those grown from Equation or symbol description not availableAsH3 and TMB. Based on their B/As and B/P ratios, films with nominal compositions Equation or symbol description not availableB12–16As2 and Equation or symbol description not availableB1.1–1.3P were grown using TMB as the boron source.