The physical and electrical characteristics of Equation or symbol description not availableZnxPb1−xS dielectric layers deposited by the coevaporation of Equation or symbol description not availableZnS andEquation or symbol description not availablePbS have been studied. The films were nearly amorphous with uniform compositions. Capacitance‐voltage (C‐V) and current‐voltage (I‐V) measurements have been made on metal‐insulator‐semiconductor (MIS) capacitors fabricated on n‐typeEquation or symbol description not availableHgCdTe. The Equation or symbol description not availableZnxPb1−xS gate insulators were 200 nm thick and had 0, 4, or 8 atomic percent Equation or symbol description not availablePbS. Introduction of Pb into the dielectric resulted in an increase in the leakage current through the insulator and an increase in the amount of charge trapped at the insulator/semiconductor interface compared to Equation or symbol description not availableZnS. The capacitances of the Pb‐containing MIS devices in accumulation were functions of the measurement frequencies. The increase in the leakage current and the dispersion in the measured capacitance were caused by traps within the bulk of the dielectric. The increased charge trapping was attributed to the formation of a thin, nonstoichiometric layer at the interface.