Abstract
We report for the first time the effects of very low pressure chemical vapor deposited (VLPCVD) titanium silicide on device electrical characteristics. The compatibility of this material for VLSI technology is examined through careful characterization of the shallow junction and gate oxide integrities, sheet resistance, and contact resistivity. It is shown that the integrity of the shallow junctions is preserved if the silicon consumption during the silicide deposition is controlled. If this consumption is not controlled, a Schottky diode behavior is observed for the source/drain junctions. It is shown that titanium silicide lowers the specific contact resistivity of metal/source‐drain and metal/polysilicon structures by an order of magnitude and a factor of 4–5, respectively. The sheet resistance of the doped polysilicon (gate conductor) is reduced by more than two orders of magnitude through using a
structure. In addition, it is shown that VLPCVD titanium silicide has no significant effect on the quality of the gate oxide. Slightly lower breakdown voltages for the
capacitors are measured, which could be due to the stress induced by siliciding the gate. The results presented in this paper indicate the suitability of VLPCVD titanium silicide films for high quality device fabrication.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
