Abstract
Hydrogenated amorphous silicon (a‐Si:H) thin films have been deposited at growth rates of 1 to 30 Å/s by chemical vapor deposition (CVD) from disilane source gas at 24 torr total pressure in a tubular reactor. The effects of substrate temperature and gas holding time (flow rate) on film growth rate and effluent gas composition were measured at temperatures ranging from 360° to 485°C and gas holding times from 3 to 62s. Effluent gases determined by gas chromatography included silane, disilane and other higher order silanes. A chemical reaction engineering model, based on a silylene
insertion gas phase reaction network and film growth from both
and high molecular weight silicon species,
, was developed. The model predictions were in good agreement with experimentally determined growth rates and effluent gas compositions.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
