Abstract
An all solid‐state cell employing lithium tetrachloroaluminate
as the lithium ion conducting solid electrolyte and using lithium intercalating compounds, titanium disulfide
, and lithium cobalt (III) oxide
, as the electroactive materials in the ldquo;rocking chair” configuration is described. Thin films of
were prepared by chemical vapor deposition onto aluminum substrates while thin films of
on aluminum were prepared by organometallic decomposition and used as the negative and positive electrodes, respectively. On charge,
was delithiated and the lithium ions were transported through the solid electrolyte to the
electrode where they were intercalated and formed lithiated titanium disulfide
. On discharge, the electrode processes are reversed. The cell was operated at 100°C and exhibited an open‐circuit potential of 2.1 V in the charged state. The cell showed excellent discharge characteristics at current densities up to 0.1 mA/cm2 and also showed only a slight loss of capacity over one hundred charge‐discharge cycles.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
