The electrochemical behavior of tantalum in the form of Equation or symbol description not availableK2TaF7 in an Equation or symbol description not availableLiF‐NaF‐KF eutectic melt has been studied by linear voltammetry in the temperature range of 560 to 815°C with and without additions of Equation or symbol description not availableNa2O. An amperometric titration has been performed by measuring the heights of the cathodic and the anodic peaks. It was shown that at a molar ratio Equation or symbol description not availableNa2O/K2TaF,=1 the predominating complex in the melt is Equation or symbol description not availableTaOF52−, whereas with an Equation or symbol description not availableNa2O/K2TaF7 molar ratio of 2 it is Equation or symbol description not availableTaO2Fx(x−1)−, probably in the form of Equation or symbol description not availableTaO2F43−. Increase in the Equation or symbol description not availableNa2O/K2TaF7 molar ratio in excess of two leads to a decrease of tantalum concentration in the melt, and precipitation of Equation or symbol description not availableKTaO3 occurs. Both the fluoro complex and the monooxofluoro complex were reduced to metal in a single five‐electron step. The fluoro complexes, in the temperature range 625 to 815°C with potential scan rates <0.5 V · s−1, discharge quasi‐reversibly, but at potential scan rates >0.5 V · s−1 they discharge irreversibly. Monooxofluoro complexes discharge irreversibly at all temperatures and scan rates studied. The diffusion coefficient of the tantalum fluoro complex depends on the temperature as Equation or symbol description not availablelogD=−2.55−2044/T with an activation energy of 39.1 kJ · mol−1. For the tantalum monooxofluoro complex the dependence is Equation or symbol description not availablelogD=−2.35−2293/T with an activation energy of 43.9 kJ · mol−1.