Presented is the theoretical characterization of an electrochemical cell that is uniformly accessible to mass transfer and exhibits a nearly uniform primary current distribution over most of the electrode. Conceptually, the cell consists of two parallel, coaxial disks of radius Equation or symbol description not availableR with a gap between the disks of length Equation or symbol description not availableL. One disk forms the working electrode, and the other disk is a porous surface through which electrolyte is assumed to be injected with a uniform axial velocity Equation or symbol description not availableV. The aspect ratio of the gap between the disks Equation or symbol description not available(L/2R) is small compared to unity. Analytic expressions analogous to the Levich equation are derived for the mass‐transfer‐limited current density as a function of the physical properties of the electrolyte, the injection velocity Equation or symbol description not availableV, and the gap length Equation or symbol description not availableL. The approximate analytic results are compared to numerical computations and are found to agree within 2% for typical operating conditions. The effect of gap aspect ratio on the primary current distribution is also explored. Numerical solutions show that the primary current distribution is flat over most of the electrode when the gap aspect ratio is much less than unity, but, because of the cell geometry, the local current density always becomes infinite at the electrode/insulator boundary.