Ultrathin SiGe films on insulator, with high Ge fraction, are fabricated through Ge condensation. A two-step oxidation process is pursued where temperatures chosen are lower than that corresponding to the solidous curve of the Si-Ge phase diagram. In this way, the smallest achievable thickness could be decreased further compared to a single step oxidation process. We achieved a uniform Ge fraction of 0.6 at a SiGe thickness of Equation or symbol description not available6nm, indicating a ten-fold increase in Ge fraction as compared to starting epitaxial SiGe layer. The surface roughness was below Equation or symbol description not available1nm and XRD analysis indicates that the films are compressive.