Abstract
Self‐aligned formation of epitaxial
, using a Co/Ti bilayer, on linear oxide
patterned (100)Si substrates has been investigated. Rapid thermal annealing (RTA) at 550°C resulted in lateral encroachment of silicide at the Si under the edge of the oxide. After RTA at 900°C, even though an epitaxial
layer was formed on the Si substrate, defects such as lateral encroachment and void were generated under the edge of the oxide. It was found that such defects yield device failures due to deterioration of the gate oxide and the shallow junction.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
