Abstract
The
(SBT) films were successfully deposited on
substrates by liquid delivery metallorganic chemical vapor deposition (MOCVD) with a single cocktail of
and
The Bi/Ta mol ratio increases and Sr/Ta decreases with increasing deposition temperature at a precursor mol ratio of 0.5. At the deposition temperature of 400°C and in range of 0.5 to 1 of the precursor mol ratio, Sr/Ta and Bi/Ta ratio in SBT are close to 0.4 and 1.1, which matches the required Sr/Ta and Bi/Ta ratio in SBT thin films. The step coverage of SBT films obtained at aspect ratio of 1 is about 90% and is suitable for high density memory device application. The remanent polarization
and coercive field
of
thin films annealed at 750°C were 13 μC/cm2 and 52 kV/cm at an applied voltage of 5 V. The SBT films annealed at 750°C showed practically no polarization fatigue up to
switching cycles. © 2001 The Electrochemical Society. All rights reserved.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
