Abstract
An
thin‐film cathode was deposited onto sintered alumina and
substrates. After annealing at
in
for
, the film deposited on alumina consisted of large particles with several cracks, whereas the film deposited on the
substrate was composed of very small and uniform particles. The films deposited on
showed improved electrochemical properties, such as peak potential divergence and rate capability, over those for the alumina substrate electrode, which can be attributed to differences of the particle size, surface morphology, and the low electrical resistance of the current collector. ©1999 The Electrochemical Society
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
