A molten carbonate fuel cell (MCFC) unit cell design (i‐MCFC) is introduced. In the i‐MCFC, the Equation or symbol description not availableCO2 gas necessary for the cathode operation is supplied separately from the cathode gas by means of an additional gas channel through the electrolyte tile (matrix). Therefore the i‐MCFC cathode can be operated on air or Equation or symbol description not available100%O2. With the i‐MCFC an MCFC with extended potential for integration in other systems, trigeneration, is obtained. Furthermore when adding a small appropriate partial Equation or symbol description not availableCO2 pressure Equation or symbol description not available(10−3 bar) to the cathode gas, the Equation or symbol description not availableNiO dissolution which is a main problem limiting the MCFC lifetime, is solved even when the cell is operated at elevated pressures. Laboratory scale cells Equation or symbol description not available(3 cm2) built according to the i‐MCFC design, operated at Equation or symbol description not available100%O2 cathode gas, performed better than the same cells driven under standard MCFC conditions. When using air as cathode gas the performance is comparable. Our cells suffered from a large ohmic resistance, but the expected large diffusion loss due to Equation or symbol description not availableO2− and/or Equation or symbol description not availableCO2 diffusion was not observed. ©1999 The Electrochemical Society