Abstract
The growth and source-depletion characteristics of ZnTe were investigated by the horizontal open-tube method using H2 carrier gas. The system consists of vapor-etching, supersaturation gas (preferential growth), nucleation and reactor-wall deposition regions from the source-zone downstream. The preferential growth region widens owing to the decrease in the nucleation temperature along with the decrease in the temperature gradient near the source-zone or the flow rate. This region gives smooth, flat epi-layers and can be described by a quasi-equilibrium model. On the other hand, the reactor-wall deposition characteristics can be expressed by a complete equilibrium model if a substrate is set at a position far enough from the critical-nucleation position. Thermodynamic analysis of the laminar and diffusion flows gives good agreement with the experimental results.
Access this article
The computer you are using is not registered by an institution with a subscription to this article. Please choose one of the options below.
