Abstract
The springback is variably sensitive to materials and process parameters. Considering springback occurred in a formed part is significant for designing tools and dies. In this paper, experiments of a V-shape bending test were performed for investigating the springback effect. The punch parameters variation has been observed in ASTM A-36 mild carbon steel. Punch radius used and punch angle). The V-shape bending of mild steel was performed using Universal Testing Machine (UTM) at various punch radius (2, 4, and 6 mm) and punch angle (80°, 85°, and 90°) and at constant of die radius (10 mm) and die width (50 mm). The experimental result indicates that the punch radius has a most significant impact on springback behaviour of these sheet metal. This is verified through our experimental work using V-shape bend testing.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.