This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our Privacy and Cookies policy.
Brought to you by:
Paper The following article is Open access

Design Steering System with Independent Front Wheel Drive of The Hybrid Vehicle-Air Pressure and Electrical

, , , and

Published under licence by IOP Publishing Ltd
, , Citation B Setyono et al 2019 IOP Conf. Ser.: Mater. Sci. Eng. 462 012013 DOI 10.1088/1757-899X/462/1/012013

1757-899X/462/1/012013

Abstract

The development of alternative vehicle were continued by designing hybrid vehicle that using compressed air and electrical propulsion. This compressed air propulsion on the rear wheels and two electric motor as a front wheel drive (FWD) were installed independently, where left and right can rotate with different speeds and direction. Independent FWD could be a problem when two wheels has a different rotation. The first experiment was tested by measuring the rotation per minute (RPM) on each wheel. Measurement were performed by varying the position of the throttle pedal. The result of measurements on both wheels rotating speed showed a difference of 1 %. The second test was to compare the space requirement, which derived from the function of cornering radius. Space requirement for inactive vehicle cornering system is 4.52 meters and 3.39 meters when system is active.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.