Application of Fluidized Bed Furnance Bottom Ash in Civil Engineering – A Review

For several years there has been widespread and open discussion about climate problems and human responsibility for the generated waste. The number of regulations has led to a search for applications for by-products of combustion. Moreover, the forecasted economic crisis additionally motivates to use every possible material to reduce the cost of manufacturing activities. Efficient waste management is a key element for Polish companies in their efforts to reduce their negative impact on the environment. Fluid combustion of fuels in the Polish power and heat industry still belongs to relatively new technologies. Despite the application of the most technologically advanced processing methods, bottom ashes from fluidized bed boilers are still reluctantly used. The author sees possibilities of using bottom ashes in geotechnical works. The aim of this review is to present the existing source papers relating to the use of bottom ashes in construction processes. A particular area of interest is the use of said ashes in jet-grouting (JG). The paper briefly refers to fluidized bed combustion technology as a source of combustion byproducts. The author pay special attention to the characteristics defining the characteristics of the ashes. The reader's attention will then be drawn to jet-grouting technology. References can be found to the methodology of general cement-soil testing. Due to the nature of the use of JG, the focus is particularly on their strength, water-permeability and frost resistance properties. Due to the need to determine the internal structure of the cement-ground, attention was also paid to the possibility of using X-ray computed tomography for soil cement testing.