Abstract
The electroplating of iron-chromium and iron-nickel-chromium layers is an economic alternative to mild steel and hard-chrome layers from chromium (VI) electrolytes. Iron-chromium and iron-nickel-chromium layers were electrodeposited using an environment friendly chromium (III) electrolyte. The layers were heat-treated at different temperatures (150 °C, 300 °C, 450 °C and 600 °C) in order to determine the temperature at which recrystallization takes place, which phases are formed and to study the influence on the element content. The phase analysis was conducted by X-ray diffraction, the chemical composition and the microstructure were characterized by the scanning electron microscopy. Both layer systems show an X-ray-amorphous structure that begins to recrystallize at a temperature of 450 °C. From a heat-treatment temperature of 600 °C, the organic additives decompose and the oxygen forms chromium oxide with the chromium.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.