Paper The following article is Open access

Combustion analysis of porous radiant burner for commercial cooking applications

, , and

Published under licence by IOP Publishing Ltd
, , Citation Loveneesh Sharma et al 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1017 012023 DOI 10.1088/1757-899X/1017/1/012023

1757-899X/1017/1/012023

Abstract

High efficiency and low efficiency were observed by using porous burner technology for commercial cooking. The whole research consists of survey of these three types of burners. Like burners diameter having convergent 100mm, straight 100mm and80mm divergent shape burner. LPG is the fuel i.e. liquid petroleum gas is used in the all experiment. The two zones combustion and preheating zones comprise by a porous burner. Preheating zone having steel balls of width 6.5mm where combustion zone has Sic matric of 10ppi was used. 150mm is the constant altitude of three burners comprise of combustion zone and having equivalence ratio from 0.10-0.60. The range at which burner was operated 79% is the maximum efficiency analyzed for porous burner having dimensions like 100mm diameter at power equal to 0.84 kW and equivalence ratio (Φ) equal to 0.49.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1757-899X/1017/1/012023