Paper The following article is Open access

Comparison and analysis of dry mixed mortar and traditional shotcrete and equipment development scheme

, , and

Published under licence by IOP Publishing Ltd
, , Citation Xu Li et al 2021 IOP Conf. Ser.: Earth Environ. Sci. 643 012077 DOI 10.1088/1755-1315/643/1/012077

1755-1315/643/1/012077

Abstract

In order to study the advantages and disadvantages of dry mixed mortar and traditional shotcreting in underground shotcreting operation, and improve the mechanization level of underground shotcreting operation. This paper makes a statistical analysis on the use of dry mixed mortar shotcreting machines in 10 pairs of mines, such as Fucun and Tianchen of Zaokuang group. It is found that the dust content in the feeding point and the shotcreting point is higher, and the rebound is also higher. Six pairs of coal mines, such as Fucun and Tianchen, were selected to compare and analyze the shotcreting efficiency, rebound rate, dust rate and economic and technical indicators between dry mixed mortar and traditional mortar. The results showed that compared with traditional mortar, the shotcreting efficiency of dry mixed mortar was increased by 55.1%, the work efficiency was increased by 97.9%, and the rebound rate was reduced by 4.8%. Based on the above problems existing in dry mixed mortar shotcreting operation, the joint scientific research institute of Zao mining group put forward the schemes of bag feeding of finished dry mixed mortar and centralized feeding of finished dry mixed mortar, as well as the new shotcreting machine JSPB-8LX which can automatically adjust the water cement ratio, laying a foundation for the comprehensive promotion and application of dry mixed mortar under the mine.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1755-1315/643/1/012077