Paper The following article is Open access

Surface quality of the plasma cermet coatings after grind finishing

, , , and

Published under licence by IOP Publishing Ltd
, , Citation E A Zverev et al 2019 IOP Conf. Ser.: Earth Environ. Sci. 378 012035 DOI 10.1088/1755-1315/378/1/012035

1755-1315/378/1/012035

Abstract

The paper presents the study results of the grind finishing effect on the surface quality of cermet wear-resistant coatings obtained by plasma spraying of mechanical mixtures. The main component for the formation of mixtures was alumina with additions of nickel or cobalt powders. The sprayed compositions surface analysis indicates the structure specificity of cermet coatings. The presented typical images of topographies and profilograms of the investigated compositions surfaces show that coatings of nickel-ceramic mixtures have an acceptable level of roughness after grind finishing.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1755-1315/378/1/012035