Abstract
Dynamic building facades offer untapped potential for reducing building energy consumption and emissions. However, there is currently a lack of suitable technologies for bespoke components for new and retrofit applications. In previous work, we developed a 3D printed polymer facade component that selectively acts as a thermal conductor or insulator depending on outdoor and indoor conditions. Our experiments demonstrate that the element can achieve effective thermal conductivities as low as 0.03 W/mK and as high as 28 W/mK in insulating and conducting modes. In this work, we assess the potential impact of this technology on reducing heating and cooling energy demand. We conducted a parametric analysis of ten physical characteristics of the facade component. Then, we simulated the façade component employed in 270 building typologies and climate combinations. Our results indicate annual energy reduction of up to 80 kWh/m2 (heating) and 15 kWh/m2 (cooling) for building typology-climate combinations that can benefit the most from this technology.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.