Abstract
Heat and Moisture Transfer (HMT) simulations are used to evaluate moisture related damage risks in building envelopes. HMT simulations are commonly performed accepting the hypothesis of not considering the moisture hysteresis of materials. The results of HMT simulation of a timber wall with hysteresis are presented, and compared to the results of three simplified models, showing the effects of hysteresis on the simulation results and on the assessment of the risk of decay. Moisture content is the most influenced variable, while temperature and relative humidity are slightly affected. The wood decay risk analysis is performed using the simplified 20% moisture content rule. Similar temperature values and relative humidity values are calculated as simplified models, while the moisture content annual average values have differences up to 2.3%. The wood decay risk obtained with the simplified models could be overestimated if the simulation is performed using the desorption curve, while it could be underestimated with the adsorption curve. The best approximation is obtained with the mean sorption curve, while the desorption curve and the adsorption curve could be used to calculate the upper and lower boundary of the moisture contents respectively.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.