Paper • The following article is Open access

Analysis of Chatter and Turning Errors of Basalt Fiber Reinforced Polymer Concrete Lathe

, , and

Published under licence by IOP Publishing Ltd
, , Citation Ping Xu et al 2021 J. Phys.: Conf. Ser. 1748 062058 DOI 10.1088/1742-6596/1748/6/062058

Download Article PDF

Article metrics

89 Total downloads

Share this article

Author affiliations

1 School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000

2 Research Institute of Technology and Equipment for the Exploitation and Utilization of Mineral Resources, Liaoning Technical University, Fuxin 123000

Buy this article in print

Journal RSS
Sign up for new issue notifications
1742-6596/1748/6/062058

Abstract

In order to improve the turning accuracy of the lathe, a basalt fiber reinforced polymer concrete lathe bed was designed. In the light of theory, the turning error model of the lathe, the vibration of the lathe-workpiece system and the average amplitude calculation model of turning error are established. The Runge-Kutta method is used to calculate the vibration of the lathe-workpiece. The influence of the workpiece radius and turning parameters on the average amplitude of the turning error is studied. The results shows that average amplitude of the turning error is significantly influenced by feed rate, workpiece radius, back engagement and spindle speed from large to small.

Export citation and abstract BibTeX RIS

Previous article in issue
Next article in issue

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1742-6596/1748/6/062058