Paper The following article is Open access

Aerodynamic tests of small sized devices of recycled water-cooling

, , and

Published under licence by IOP Publishing Ltd
, , Citation K E Bondar et al 2020 J. Phys.: Conf. Ser. 1679 052033 DOI 10.1088/1742-6596/1679/5/052033

1742-6596/1679/5/052033

Abstract

There is given a method of aerodynamic resistance coefficient determination of small-sized devices sprinklers of recycled water-cooling (mini cooling towers) in this article. Mini cooling towers are widely used at systems of recycled water supply in enterprises, because it are mobile, services a specific technological units or apparatuses, have a less energy intensity, more effective and safety unlike of oversized. There was compared two types of mini cooling towers in this labor: small-sized cooling tower with twisted air flow and with counter current flow. Also was developed and made the experimental unit for carry out of aerodynamic tests. The experiments on determination of aerodynamic resistance coefficient carried out depending on air flow rate in the interval from 0.5 to 3 m/s and irrigation density from 0 to 12 m3/(m2h). It shown that the sprinkler OB-65 (for mini cooling towers with twisted air flow, with diameter mesh casings 65mm) have more high aerodynamic resistance coefficient than the sprinkler OGGT-65 (for mini cooling towers with counter current flow with diameter mesh casings 65 mm) at the equal parameters of the experiment. Obtained coefficients of aerodynamic resistance of sprinklers in the mini cooling towers with the twisted air flow and with counter current flow approximated by the method of least squares and are presented as linear dependences in logarithmic coordinates of aerodynamic resistance and Reynolds number. It known that the coefficient of aerodynamic resistance is determine by common relation A/ReK.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1742-6596/1679/5/052033