Abstract
This paper introduces a topology optimization design method for flexible mechanism of composite wing leading edge based on discrete material optimization (DMO) with composite material. The DMO method is combined with the topology optimization to select the deviation of the actual displacement and the target displacement of the 10 coordinate points on the initial curve of the leading edge as the objective function, and the volume fraction of each phase material is used as the constraint to establish the composite material optimization model, which is solved by the OC optimization criterion method. The MATLAB codes are compiled to calculate the optimization problem and a distinct result image is obtained. The CATIA software is used to model the topology image in three dimensions, and the model is imported into Hyperworks software for simulation analysis. The results show that this complaint mechanism can achieve a maximum deflection of 9.1 degrees, which verifies the feasibility of the method.
Export citation and abstract BibTeX RIS
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.