Abstract
This paper shows that a part of a digital-to-analog conversion (DAC) function can be included in a pixel circuit to save the circuit area of an integrated data driver fabricated with low-temperature polycrystalline silicon thin-film transistors (LTPS-TFTs). Because the pixel-level DAC can be constructed by two TFTs and one small capacitor, the pixel circuit does not become markedly complex. The design of an 8-bit DAC, which combines a 6-bit resistor-string-based DAC and a 2-bit pixel-level DAC for a 4-in. diagonal VGA format active matrix organic light-emitting diode (AMOLED), is shown in detail. In addition, analysis results are presented, revealing that the 8-bit DAC scheme including a 2-bit pixel-level DAC with 1:3 demultiplexing can be applied to very high video formats, such as XGA, for a 3 to 4-in. diagonal AMOLED. Even for a 9- to 12-in. diagonal AMOLED, the proposed scheme can still be applied to the XGA format, even though no demultiplexing is allowed. The total height of the proposed 8-bit DAC is approximately 960 µm, which is almost one-half of that of the previous 6-bit resistor-string-based DAC.