This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our Privacy and Cookies policy.
Brought to you by:
The following article is Open access

Controlling Groudwater System by Pattern Fracture Approach in Subsurface Volcanic Deposit: Mt.Salak- Mt.Pangranggo, West Java, Indonesia

, , and

Published under licence by IOP Publishing Ltd
, , Citation Cipta Endyana et al 2016 IOP Conf. Ser.: Earth Environ. Sci. 29 012029 DOI 10.1088/1755-1315/29/1/012029

1755-1315/29/1/012029

Abstract

In general, the volcanic region has high potential of water resources. However, volcanic field are very complex in structure and texture of rock compared with sedimentary rocks. They also have different porosity in type and distribution, with the spread of the highly different within a short distance. Consequently, groundwater in this volcanic area is quite difficult to predict groundwater flow. Those rocks should be identified as vertical and lateral spreading. In fact, the groundwater a is not flowing in the volcanic rock pores only, but also flow in fractures that developed by the volcanic and tectonic processes. Ciherang area which is located between Mount Salak and Mount Gede-Pangrango and bypassed by tectonic faults, has a complex fracture pattern. The result of this fracture pattern research indicated that at least four pattern of fracture systems were developed. All fracture patterns were suggested in relation with the imposition of volcanic rocks. Groundwater in these fractures have to consider for water resources calculation. Therefore fracture media has become one of the important parameters in the calculation of water resources. The modelling of subsurface volcanic deposit was developed by resistivity value of rock deposits. They can describe the distribution of volcanic deposits until 150 meters below surface. The fracture that constantly developed up to certain depth will be exposed by contrast enhancement of resistivity model of rock deposits. Delineation of fracture pattern will be known which each fracture pattern is associated with the flow of groundwater. Furthermore, there are also fractures are influenced by tectonic faults, and fractures caused by both of the processes. Fractures with high intensity indicated direction of porous media have a trend with relatively north-south direction and the fracture which is constantly up to certain depth is indicated as a pathway of groundwater flow, but several fractures which are affected by tectonic regional process will become a barrier of groundwater flow. To control the validity of fracture development, the stable isotope deuterium and oxygen content were used in groundwater as well as flowing water between one fracture systems to other systems.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1755-1315/29/1/012029