This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our Privacy and Cookies policy.
Brought to you by:

The use of tunable diode laser absorption spectroscopy for the measurement of flame dynamics

, , and

Published 15 December 2005 2006 IOP Publishing Ltd
, , Citation A G Hendricks et al 2006 Meas. Sci. Technol. 17 139 DOI 10.1088/0957-0233/17/1/023

0957-0233/17/1/139

Abstract

Tunable diode laser absorption spectroscopy was used to measure temperature fluctuations in acoustically forced laminar and turbulent flames. The absorption of two high-temperature water lines, at 7444.37 cm−1 (v1+v3 bands) and 7185.59 cm−1 (2v1, v1+v3 bands), yielded an instantaneous temperature measurement of the product stream. The instantaneous temperature of the gases was used as an indicator of the energy transferred to the product stream from the combustion process. The frequency response of product gas temperature to velocity perturbations was compared to the frequency response of OH* chemiluminescence, an indicator of the chemical heat release rate. Past measurements of flame dynamics used chemiluminescence as the sole indicator of heat release rate, in effect assuming that the energy input rate from the flame into the acoustic field is dynamically equivalent to the chemical reaction rate. Through the use of TDLAS, the unsteady enthalpy of the gases was measured, which includes the effects of thermal diffusion and heat transfer. The measurements show that the frequency response function of gas temperature differs significantly from the chemiluminescence frequency response.

Export citation and abstract BibTeX RIS

Please wait… references are loading.
10.1088/0957-0233/17/1/023