H Jänchen et al 1996 Pure Appl. Opt. 5 405 doi:10.1088/0963-9659/5/4/007
H Jänchen
, D Endelema
, N Kaiser
and F Flory![]()
Precise determination of the main refractive indices of biaxial anisotropic coatings is essential for the calculation of their optical performance. Earlier measurements based on wave guiding methods have proved to yield excellent results with obliquely deposited and hence anisotropic layers, deposited under an angle of
or less. But with higher deposition angles, new problems arise due to the less defined microstructure and the increasing influence of the accuracy of the column inclination angle on the resulting indices. In a theoretical study, these effects are shown to limit the precision of the method. Experimental results at
on
coatings, deposited at angles of
,
,
and
, are given. All three main refractive indices were found to decrease with an increasing deposition angle, while anisotropy increases almost linearly.
Issue 4 (July 1996)
Received 22 January 1996
H Jänchen et al 1996 Pure Appl. Opt. 5 405
S Tamate et al 2009 New J. Phys. 11 093025
D Grossman et al 2008 New J. Phys. 10 023036
R. K. Honeycutt et al. 1998 The Astronomical Journal 115 2527
Pavel Groisman and Amber J Soja 2009 Environ. Res. Lett. 4 045001
Derek A Stewart 2008 New J. Phys. 10 043025
Vladislav Volman et al 2007 Phys. Biol. 4 91
L Sanchez-Palencia et al 2008 New J. Phys. 10 045019
Michael Martin Nieto and D Rodney Truax 2000 New J. Phys. 2 18
Nikolay Gromov et al JHEP12(2009)060