This page lists all articles that have been accepted for publication in Journal of Micromechanics and Microengineering but have not yet been published online.

Please note: article titles and authors may change upon publication.

Special issues

• PowerMEMS 11

Regular articles

• Papers
• Technical Notes

Papers: PowerMEMS 11

Integration of dispenser-printed ultra-low-voltage thermoelectric and energy storage devices
Zuoqian Wang, Alic Chen, Rich Winslow, Deepa Madan, Rei-Cheng Juang, Michael Nill, James Evans and Paul K Wright

Papers

Lorentz-force transduction for RF μmicromechanical filters
Sepehr Forouzanfar, Rafaat R Mansour and E M Abdel-Rahman
Provisionally scheduled for January 2012

Analysis of resonance frequency and pull-in voltages of curled micro-bimorph cantilevers
Shahina Mumthaz Chakkalakkal Abdulla, H Yagubizade and G J M Krijnen
Provisionally scheduled for February 2012

Reliability assessment of electro-statically driven MEMS devices: based on a pulse induced charging technique
Jinyu J Ruan, David Trémouilles, Fabio Coccetti, Nicolas Nolhier, G J Papaioannou and Robert Plana
Provisionally scheduled for February 2012

A novel shock and high robust gyro sensor utilizing a one-port surface acoustic wave reflective delay line
Haekwan Oh, Chen Fu, Sang Sik Yang, Wen Wang and Keekeun Lee
Provisionally scheduled for February 2012

Tunable band- stop filter using metamaterial structure and MEMS bridges on silicon substrate
Avra Kundu, Sonali Das, Santanu Maity, Bhaskar Gupta, Samir K Lahiri and H Saha
Provisionally scheduled for February 2012

Single-phase liquid flow forced convection under nearly uniform heat flux boundary condition in microchannels
Man Lee, Yi-Kuen Lee and Yitshak Zohar
Provisionally scheduled for February 2012

Electrical conductivity enhancement in inkjet-printed narrow lines through gradual heating
ChangJae Kim, Masaya Nogi and Katsuaki Suganuma
Provisionally scheduled for February 2012

Automated parallel microassembly for MEMS application
Henry K Chu, James K Mills and William L Cleghorn
Provisionally scheduled for February 2012

Non-contact intraocular pressure measurement device using a micro reflected air pressure sensor for the pre-diagnosis of the glaucoma
Kyoung Hwan Kim, Byeong Hee Kim and Young Ho Seo
Provisionally scheduled for February 2012

Fourier analysis of blurred images for the measurement of the in-plane dynamics of MEMS
Neil Ellerington, Ben Bschaden, Ted Hubbard and Marek Kujath
Provisionally scheduled for February 2012

A multi-material electrohydrodynamic jet (E-Jet) printing system
Erick Sutanto, Shigeta Kazuyo, Yongkwan Kim, Philip Graf, David Hoelzle, Kira Barton, Andrew Alleyne, Placid Ferreira and John A Rogers
Provisionally scheduled for February 2012

Fully front-side bulk-micromachined single-chip micro flow-sensors for bare-chip SMT (surface mounting technology) packaging
Jiedan Liu, Jiachou Wang and Xinxin Li
Provisionally scheduled for February 2012

Hydrofluoric acid assisted bonding of diatoms with SiO₂-based substrates for microsystem application
Deyuan Zhang, Junfeng Pan, Jun Cai and Yu Wang
Provisionally scheduled for March 2012

Polymer as the protecting passivaton layer in fabricating suspended SCS structures at both anisotropic and isotropic etching
Yu-Hsin Lin and Wen-Syang Hsu
Provisionally scheduled for March 2012

A random-access microarray for programmable droplet storage, retrieval and manipulation
Yi-Ming Tseng, Jhih-Jhe Wang and Yu-Chuan Su
Provisionally scheduled for March 2012

Fabrication of a uniform microlens array over a large area using self-aligned diffuser lithography (SADL)
Hyeon-Don Kim, Gun-Wook Yoon, Jeongho Yeon, Joo-Hyung Lee and Jun-Bo Yoon
Provisionally scheduled for March 2012

Influence of strain on thermal conductivity of silicon nitride thin films
M T Alam, Mohanprasad Manoharan, M Aman Haque, C Muratore and A Voevodin
Provisionally scheduled for March 2012

Formation of liposomes using a 3D flow focusing microfluidic device with spatially patterned wettability by corona discharge
Ryan Davies, Donghwan Kim and Jaesung Park
Provisionally scheduled for March 2012

Roll-to-roll fabrication of low reflectance transparent conducting oxide film with subwavelength structures
Ta Hsin Chou, Kuei-Yuan Cheng, Chih-Wei Hsieh and Yasahiro Takaya
Provisionally scheduled for March 2012

Fabrication and characterization of a multidirectional-sensitive contact-enhanced inertial microswitch with electrophoretic flexible composite fixed electrode
Zhuoqing Yang, Bin Zhu, Wenguo Chen, Guifu Ding, Hong Wang and Xiaolin Zhao
Provisionally scheduled for March 2012

Design and fabrication of mid-wavelength infrared Fresnel lens via liquid poly(methyl methacrylate)
Chun-Chao Tsui, Hsiang-Chun Wei, Wen-Fa Chang and Guo-Dung J Su
Provisionally scheduled for March 2012

Freestanding smooth micron-scale polydimethylsiloxane (PDMS) membranes by thermal imprinting
Leeya Engel, Jenny Shklovsky, David Schreiber, Slava Krylov and Yosi Shaham-Diamand
Provisionally scheduled for March 2012

An improved SPM-based contact tester for the study of microcontacts
Lei Chen, Jim Guo, Nikhil Joshi, Hassan Eid, George G Adams and Nicol E McGruer
Provisionally scheduled for March 2012

Precision patterning of conductive polymer nanocomposite using a laser-ablated thin film
Chao-Xuan Liu and Jin-Woo Choi
Provisionally scheduled for March 2012

Three-dimensional magnetic terahertz metamaterials using a multilayer electroplating technique
Kebin Fan, A C Strikwerda, Richard D Averitt and Xin Zhang
Provisionally scheduled for March 2012

A nanoporous silicon nitride membrane using a two-step lift-off pattern transfer with thermal nanoimprint lithography
Bhargav Nabar, Zeynep Celik-Butler, Brian Dennis and Richard Billo
Provisionally scheduled for March 2012

A thermal driven silicon micro XY-stage integrated with piezoresistive sensors for nano-positioning
Y S Choi, Y Zhang and Dong-Weon Lee
Provisionally scheduled for March 2012

Control of nanoenergetics through organized microstructures
Venkata Sharat Parimi, Srinivas Tadigadapa and R Yetter
Provisionally scheduled for March 2012

Innovative through-silicon via formation approach for wafer level packaging applications
Chao-Wei Tang, Hong-Tsu Young and Kuan-Ming Li
Provisionally scheduled for March 2012

Modeling and design of a capacitive microwave power sensor for X-band applications based on GaAs technology
Yan Cui and Xiao-ping Liao
Provisionally scheduled for March 2012

An electrodynamic preconcentrator integrated thermoelectric biosensor chip for continuous monitoring of biochemical process
Yong-Hwan Choi, Min-gu Kim, Dong-Hyun Kang, Jaesam Sim, Jongbaeg Kim and Yong-Jun Kim
Provisionally scheduled for March 2012

Monolithic fabrication of millimeter-scale machines
Pratheev Sreetharan, J Peter Whitney, Marc Strauss and Robert J Wood
Provisionally scheduled for March 2012

Effect of iron catalyst thickness on vertically aligned carbon nanotube forest straightness for CNT-MEMS
Kellen Moulton, Nicholas B Morrill, Adam M Konneker, Brian Jensen, Richard R Vanfleet, David D Allred and Robert C Davis
Provisionally scheduled for March 2012

Morphologies of conductive looped liquid lines channels inkjet-printed on substrate surfaces
Chin-Tai Chen and Kun-Ze Tu
Provisionally scheduled for March 2012

Technical Notes

Programmable patterning of polymeric microparticle by floating electrodes-assisted electrospray
Xu Zhang and Yi Zhao
Provisionally scheduled for March 2012