Guo Min Zhang et al 2004 Supercond. Sci. Technol. 17 1018 doi:10.1088/0953-2048/17/8/012
Guo Min Zhang1,2, Justin Schwartz1,3,4, P V P S S Sastry1, Liang Zhen Lin2, Li Ye Xiao2 and Yun Jia Yu2
Show affiliationsWhen a coil or a winding is made, the superconducting tapes must be bent to different curvatures. Bending of high temperature superconducting (HTS) tapes can result in degradation of the critical current density and thus increase the AC losses of the tapes. Therefore, the effects of bending strain on the critical current and AC loss should be considered in the design of high temperature superconducting apparatus. In this paper, the dependence of critical current and AC loss on the bending diameter of the superconductor tape was experimentally investigated. The diameters of the curved tape were varied from 110 to 36 mm. AC loss measurements were taken at 77 K, 50 Hz. Analysis of the bending strain effects on the critical current and AC loss are presented. An expression describing the dependence of AC losses on bending strain is proposed by modifying Norris' formula. The experimental results are presented and compared with the calculated values.
84.71.Mn Superconducting wires, fibers, and tapes
74.25.Ld Mechanical and acoustical properties, elasticity, and ultrasonic attenuation
74.25.Fy Transport properties (electric and thermal conductivity, thermoelectric effects, etc.)
Issue 8 (August 2004)
Received 3 March 2004
Published 15 June 2004
Guo Min Zhang et al 2004 Supercond. Sci. Technol. 17 1018
Teemu Hartikainen et al 2003 Supercond. Sci. Technol. 16 963
J H Su et al 2003 Supercond. Sci. Technol. 16 1134
Pål Erik Goa et al 2001 Supercond. Sci. Technol. 14 729
thin films by scanning Hall probe microscopy
A Oral et al 1997 Supercond. Sci. Technol. 10 17
P J Allisy-Roberts 2005 J. Radiol. Prot. 25 97
Bo Lindell 2000 J. Radiol. Prot. 20 1
Brian R Hunt 1996 Nonlinearity 9 845
G Derks et al 1995 Nonlinearity 8 1087
R S Mackay and J D Meiss 1992 Nonlinearity 5 149