Walter Fichter et al 2005 Class. Quantum Grav. 22 S139 doi:10.1088/0264-9381/22/10/002
Walter Fichter1, Peter Gath1, Stefano Vitale2 and Daniele Bortoluzzi2
Show affiliationsThe top-level requirement of the LISA Pathfinder mission is the verification of pure relative free fall between two test masses with an accuracy of about 3 × 10−14 m s−2 Hz−1/2 in a measurement bandwidth between 1 mHz and 30 mHz. The drag-free control system is one of the key technology elements that shall be verified. Its design is strongly connected to the overall system and experimental design, in particular, via the following issues: the differential test mass motion and thus the science measurements depend on the control system; design constraints, such as negative stiffness of test masses and electrostatic actuation cross-talk, have an impact on science and control system performance; derived requirements for control system components, in particular, the micro-propulsion system, must be within reasonable and feasible limits. In this paper, the control design approach is outlined and the system-related issues are addressed.
Issue 10 (21 May 2005)
Received 10 November 2004, in final form 1 February 2005
Published 21 April 2005
Walter Fichter et al 2005 Class. Quantum Grav. 22 S139
Michele Cappellari and Richard M McDermid 2005 Class. Quantum Grav. 22 S347
B S Sheard et al 2005 Class. Quantum Grav. 22 S221
F Acernese et al 2005 Class. Quantum Grav. 22 S279
S Anza et al 2005 Class. Quantum Grav. 22 S125
P Barriga et al 2005 Class. Quantum Grav. 22 S199
P J Wass et al 2005 Class. Quantum Grav. 22 S311
E J Elliffe et al 2005 Class. Quantum Grav. 22 S257
H Grote et al 2005 Class. Quantum Grav. 22 S193
H Vocca et al 2005 Class. Quantum Grav. 22 S319