C Kessler et al 2010 Metrologia 47 06016 doi:10.1088/0026-1394/47/1A/06016
C Kessler1, D T Burns1, P J Allisy-Roberts1, J P McCaffrey2, M R McEwen2 and C K Ross2
Show affiliationsA comparison of the standards for absorbed dose to water of the National Research Council of Canada (NRC) and of the Bureau International des Poids et Mesures (BIPM) was carried out in the 60Co radiation beam of the BIPM in May 2009 under the auspices of the key comparison BIPM.RI(I)-K4. The comparison result, based on the calibration coefficients for two transfer standards and expressed as a ratio of the NRC and the BIPM standards for absorbed dose to water, is 0.9980(52). This result replaces the 1998 NRC value of 0.9976(51) in this key comparison. The degrees of equivalence between the NRC and the other participants in this comparison have been calculated and the results are given in the form of a matrix for the ten national metrology institutes (NMIs) with published results that have taken part in the ongoing comparison for absorbed dose to water. A graphical presentation is also given.
Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.
The final report has been peer-reviewed and approved for publication by the CCRI Section I, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
Issue 1A (Technical Supplement 2009)
C Kessler et al 2010 Metrologia 47 06016
C Kessler et al 2010 Metrologia 47 06013
D J Thomas et al 2010 Metrologia 47 06014
C Kessler et al 2010 Metrologia 47 06015
David T Burns 2009 Metrologia 46 585
Cecilia Kessler et al 2009 Metrologia 46 L24
David T Burns et al 2009 Metrologia 46 L21
Shradha Mishra et al J. Stat. Mech. (2010) P02003
E W Schmidt et al 2009 J. Phys.: Conf. Ser. 163 012028
D. V. Lukić et al. 2007 ApJ 664 1244