Tripurari Lal et al 2009 Metrologia 46 07014 doi:10.1088/0026-1394/46/1A/07014
Tripurari Lal1, Chris Sutton2, Feng-Yu-Yang3, Jin Wan Chung4, Kitty Fen5, Tak Kin Chan6, Shih Mean Lee7, Rungsiya Sukhon8, Soo Fatt Chen9, Renanta Hayu10 and Ireen Field11
Show affiliationsThis report summarizes the results of a comparison of mass standards conducted between eleven participating members, including the pilot laboratory, of the Asia-Pacific Metrology Program (APMP). One set of five weights with nominal mass values 10 kg, 500 g, 20 g, 2 g and 100 mg were used as traveling artifacts. These nominal values were chosen as they followed the nominal values of CCM.M-K2. The program was piloted by the National Physical Laboratory, New Delhi, India (NPLI), and the Center for Measurement Standards, Industrial Technology Research Institute (CMS-ITRI), Taiwan, Korea Research Institute of Standards and Science (KRISS), Korea, and Measurement Standards Laboratory (MSL), New Zealand, have provided all other help to successfully organize and run the comparison. The set of five weights was circulated among all the participating laboratories in July 2004 and received back from the last participant in March 2007. The final report of this comparison is being given in this document.
Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.
The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
Issue 1A (Technical Supplement 2009)
Tripurari Lal et al 2009 Metrologia 46 07014
Shinji Mukohyama et al JCAP07(2005)013
David G. Cerdeño et al JHEP12(2004)048
David Kastor and Jennie Traschen JHEP08(2004)045
D L Duewer et al 2009 Metrologia 46 08003
Chuan-Tsung Chan and Wei-Ming Chen JHEP11(2009)081
G Ratel and C Michotte 2003 Metrologia 40 06024
P L Schaffer et al 2008 New J. Phys. 10 053001
Nabil Iqbal and Harvey B. Meyer JHEP11(2009)029
X Ding et al 2008 J. Micromech. Microeng. 18 075017