This report describes the key comparisons named CCM.F-K1.a and CCM.F-K1.b, for force with loads of 5 kN and 10 kN. The Draft A Report, reporting the measurement results of the key comparisons, has been accepted at the force expert group meeting in Pretoria on 23 March 2004. This became Part 1 of the preliminary Draft B Report. Then, there have been several discussions to find the best way for the determination of the reference value for force values 5 kN and 10 kN in the key comparisons CCM.F-K1.a and CCM.F-K1.b. Following the meeting held in Queretaro, Mexico, by CENAM, from 3 to 5 December 2007, the reference values have been calculated for each single transducer (see chapter 2), and as one reference value for 5 kN and a second reference value for 10 kN (see chapter 3). To get a better consistency a linear model for the drift of transducers has been applied. The results have been evaluated according to the paper from M G Cox, 'The evaluation of key comparison data' (2002 Metrologia 39 589–595).

Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.

The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).