N G Domostroeva and A G Chunovkina 2008 Metrologia 45 07009 doi:10.1088/0026-1394/45/1A/07009
N G Domostroeva and A G Chunovkina
Show affiliationsThis article describes the results of the first COOMET key comparison in which four national metrology institutes (NMIs) took part. Three samples of Newtonian liquids with nominal kinematic viscosities of 30 mm2/s, 100 mm2/s and 1000 mm2/s at 20 °C were used to determine the degrees of equivalence of the national standards of Belarus, Ukraine and Bulgaria to the standards of NMIs that took part in the KC CIPM (CCM.V-K1).
The results of the evaluation of data obtained for all liquids used in the comparison were compared with the reference values (KCRV), obtained in the first key comparison CIPM (CCM.V-K1).
Main text. To reach the main text of this Paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.
The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).
Issue 1A ( 1 January 2008)
N G Domostroeva and A G Chunovkina 2008 Metrologia 45 07009
G Ratel et al 2007 Metrologia 44 06002
G Ratel et al 2008 Metrologia 45 06009
Stefan Makovnik 2008 Metrologia 45 07018
Joële Viallon et al 2008 Metrologia 45 08008
Vikram Mukundan et al 2009 J. Micromech. Microeng. 19 065008
C Kessler et al 2006 Metrologia 43 06005
Tom Nelson et al 2008 Metrologia 45 01009
R Goebel et al 2008 Metrologia 45 01001
C S J Wolff Briche 2003 Metrologia 40 08010