Quick search Find article
Quick search
Find article

EUROMET.M.D-K4/EUROMET Project 702: Comparison of the calibrations of high-resolution hydrometers for liquid density determinations

S Lorefice1, A Malengo1, C Vámossy2, H Bettin3, H Toth3, M do Céu Ferreira4, A Gosset5, T Madec5, M Heinonen6, C Buchner7, E Lenard8, R Spurny9, U Akcadag10 and N Domostroeva11

Show affiliations


KEY COMPARISON

The main objective of the EUROMET project 702 was to compare the extent of comparability among eleven participating European national metrology institutes (INRIM (IT), OMH (HU), PTB (DE), BEV (AT), IPQ (PT), LNE (FR), MIKES (FI), GUM (PL), SMU (SK), UME (TR) and VNIIM (RU)) in performing calibrations of high-resolution hydrometers for liquid density determination in the range between 600 kg m-3 and 1300 kg m-3. By means of two groups of four similar transfer standards of excellent metrological characteristics, the participating laboratories were initially divided into two groups (petals) linked by the three density laboratories of INRIM, OMH and PTB.

The results of the participating laboratories have been analyzed in this report and a good agreement was found between the results provided by most of the participants. These results allowed also determination of the degrees of equivalence of each NMI participating with the EUROMET_key comparison reference values (EU_KCRV); they will provide a basis for the review of the Calibration Measurement Capabilities (CMC) entries on hydrometer calibration, and they allowed the degree of equivalence between pairs of NMIs to be established.

The Istitituto Nazionale di Ricerca Metrologica (INRIM), Italy, formerly IMGC-CNR, coordinated the project.

Main text. To reach the main text of this Paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.

The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).


Dates

Issue 1A ( 1 January 2008)



  1. EUROMET.M.D-K4/EUROMET Project 702: Comparison of the calibrations of high-resolution hydrometers for liquid density determinations

    S Lorefice et al 2008 Metrologia 45 07008

  2. Key comparison BIPM.RI(I)-K3 of the air-kerma standards of the VSL, Netherlands and the BIPM in medium-energy x-rays

    D T Burns and L A de Prez 2009 Metrologia 46 06002

  3. Final report on CIPM key comparison of 1 kg standards in stainless steel (CCM.M-K1)

    C Aupetit et al 2004 Metrologia 41 07002

  4. Diacritical study of light, electrons and sound scattering by particles and holes

    F Javier García de Abajo et al 2009 New J. Phys. 11 093013

  5. Update of the ongoing comparison BIPM.RI(II)-K1.Co-60 including activity measurements of the radionuclide 60Co for the NMIJ, Japan and the IRMM (Geel)

    G Ratel et al 2006 Metrologia 43 06003

  6. Results from the CII-2006 campaign at the BIPM of the BIPM.L-K11 ongoing key comparison

    Lennart Robertsson et al 2007 Metrologia 44 04003

  7. Final report of the SIM 60Co absorbed-dose-to-water comparison SIM.RI(I)-K4

    C K Ross et al 2008 Metrologia 45 06011

  8. EUROMET EM.M-S1 - EUROMET Project No. 597: Comparison of magnetic flux by means of a coil transfer standard

    J Kupec et al 2003 Metrologia 40 01006

  9. Final report on CCQM-K9.2: Subsequent key comparison on pH determination of phosphate buffer by Harned cell measurements

    Petra Spitzer et al 2008 Metrologia 45 08006

  10. EUROMET Project 852: A comparison between Italian and Swiss gas flow standards in the range 0.3 m3/h to 25 m3/h

    Henri Baumann et al 2008 Metrologia 45 07011

View by subject




Export





Please login to access our web services, or create an account if you don't yet have one.

You must have cookies enabled in your web browser to be able to login.

Username
Password

Forgotten your password? Get a new one here.