H Haitjema 1997 Metrologia 34 161 doi:10.1088/0026-1394/34/2/7
H Haitjema
Show affiliationsMeasurements of depth-setting standards, carried out at nine national metrology laboratories within the framework of EUROMET project No. 301, are compared. The objects used for this comparison take the form of chromium-coated silicon substrates with rectangular grooves of 0,1 mm and 0,01 mm width and nominal depths from 30 nm to 3200 nm. For the calibration several stylus instruments, and interference microscopes based on different measuring principles, were used. The comparison shows that the participating laboratories are able, in general, to determine the groove depth with uncertainties ranging from a few nanometres for a groove of 30 nm nominal depth to some tens of nanometres for a groove of 3200 nm. At 3200 nm the scatter of measurements between the participants is characterized by a standard deviation of 40 nm, a value considered unsatisfactory for calibrations at a primary level.
06.30.Bp Spatial dimensions (e.g., position, lengths, volume, angles, and displacements)
68.37.Hk Scanning electron microscopy (SEM) (including EBIC)
Issue 2 (April 1997)
H Haitjema 1997 Metrologia 34 161
Michael J. Wolff et al. 1998 ApJ 503 815
E. Daddi et al. 2004 ApJ 617 746
O Céspedes et al 2004 J. Phys.: Condens. Matter 16 L155
K Tennakone et al 1995 Semicond. Sci. Technol. 10 1689
Sean Matt and Bruce Balick 2004 ApJ 615 921
O. Godet et al 2009 ApJ 705 L109
Guangsup Cho et al 2004 J. Phys. D: Appl. Phys. 37 2863
T J Quinn 2000 Metrologia 37 353
Hung-Liang Lai et al JHEP04(2007)089