Quick search Find article
Quick search
Find article

Comparison of high-voltage ac and pulsed operation of a surface dielectric barrier discharge

James M Williamson1, Darryl D Trump1, Peter Bletzinger1 and Biswa N Ganguly2

Show affiliations


A surface dielectric barrier discharge (DBD) in atmospheric pressure air was excited either by low frequency (0.3–2 kHz) high-voltage ac or by short, high-voltage pulses at repetition rates from 50 to 600 pulses s−1. The short-pulse excited discharge was more diffuse and did not have the pronounced bright multiple cathode spots observed in the ac excited discharge. The discharge voltage, current and average power deposited into the discharge were calculated for both types of excitation. As a measure of plasma-chemical efficiency, the ozone number density was measured by UV absorption as a function of average deposited power. The density of ozone produced by ac excitation did not increase so rapidly as that produced by short-pulse excitation as a function of average power, with a maximum measured density of ~3 × 1015 cm−3 at 25 W. The maximum ozone production achieved by short-pulse excitation was ~8.5 × 1015 cm−3 at 20 W, which was four times greater than that achieved by ac excitation at the same power level.


PACS

52.80.-s Electric discharges

52.70.Kz Optical (ultraviolet, visible, infrared) measurements

52.25.Fi Transport properties

82.33.Xj Plasma reactions (including flowing afterglow and electric discharges)

52.50.Nr Plasma heating by DC fields; ohmic heating, arcs

Subjects

Instrumentation and measurement

Plasma physics

Chemical physics and physical chemistry

Dates

Issue 20 (21 October 2006)

Received 25 May 2006, in final form 28 August 2006

Published 29 September 2006



View by subject




Export








Please login to access our web services, or create an account if you don't yet have one.

You must have cookies enabled in your web browser to be able to login.

Username
Password

Forgotten your password? Get a new one here.